More information about the product?

Contact us for access to My Adentatec and benefit from exclusive downloads!

SYSTEM PEEK-BLANK

SYSTEM PEEK-Blank is a ceramic filled high-performance polymer PEEK (Poly-ether-ether-keton).

SYSTEM PEEK-Blank is a metal-free alternative for permanent restorations.
SYSTEM PEEK-Blank is approved for implant-supported bridges, secondary structures or denture bases.
SYSTEM PEEK-Blank meets for 100 % the biocompatible requirements.
SYSTEM PEEK-Blank is available in the shades white, tooth colour and gum.

Typical material properties

Flexural strength (MPa)178
Stain at yield (%)4,2
Elongation (%)10
Tensile Modulus (MPa)5100
Density (g/cm³)1,5
Melting range (°C)340
Water absorption (%)0,4
Notched impact strength (KJ/m2)5,1
Dimensions (mm)
(X) = 12 / 16 / 20 / 25
Ø 98,3 x (X)
Ø 99,5 x (X)
Colourswhite, tooth colour, gum

Lot numbers may show minimum deviation from typical values

More information are available in our instructions for use.

Typical composition %

PEEKTiO2Pigments (Ti, Nb, Sb)O2
~ 80~ 20< 1 % (tooth colour); 0 % (white)